LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 1974 >> Pickup Automatic Trans >> Repair and Diagnosis >> General Information >> Specifications Index >> Wheel Alignment - Specifications & Adjustments >> Caster >> All Other Models

All Other Models

NOTE: Camber and caster adjustments should always be made in one operation.

If caster not within specifications, adjust by adding or removing shims between the upper arm shaft and the front suspension crossmember. To increase the caster, add shims to rear side of the upper arm shaft mounting bolt or remove shims from the front side of the upper arm shaft mounting bolt. To decrease caster, reverse procedure.

scientia non olet · About LEMON Manuals