Steering Column and Wheel - SW Harness - Remove And Replace: Install
- Install the bolt that attaches the harness to the steering wheel.
3.7 N.m (2.7 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Cordless 1/4 in Dr Ratchet
- 4 in extension
- Torx T20 socket
- Torque Wrench 1/4 in Dr Hexagon - 1060071-00-A
- Connect the RH steering wheel heater connector.
- Connect the LH steering wheel heater connector.
- Connect the RH steering wheel switch connector.
- Connect the LH steering wheel switch connector.
- Secure the harness to the LH steering wheel switch harness bracket.
- Secure the harness to the RH steering wheel switch harness bracket.
- Install the steering wheel lower spoker cover. See STEERING COLUMN AND WHEEL - STEERING WHEEL, LOWER SPOKE COVER - REMOVE AND REPLACE .
- Install the steering wheel. See STEERING COLUMN AND WHEEL - STEERING WHEEL - PUR LEATHER - REMOVE AND REPLACE .
- Install the driver airbag. See FRONT AIR BAGS - DRIVER AIRBAG ASSEMBLY - REMOVE AND REPLACE .
- Connect the LV power. See LV Battery - Li-Ion - Disconnect And Connect .
- Install the rear underhood apron. See UNDERHOOD TRIM - REAR APRON ASSEMBLY - REMOVE AND REPLACE .