Firmware Reinstall (Li-Ion Battery) - Contractors Closed
- Enable Service Mode. See SERVICE MODE .
- Go to the Service Mode menu: touch the Service Mode "wrench" icon at the bottom of the vehicle touchscreen.NOTE: Alternatively, for vehicles with older firmware versions: Touch Controls (vehicle icon), and then touch Service Mode .
- On the vehicle touchscreen, touch Software Reinstall .
- When the prompt appears, read the instructions, and then touch REQUEST .
- Touch the Software
tab and touch SOFTWARE UPDATE
> INSTALL NOW
.NOTE: If a countdown timer appears, tap the timer until the clock reaches "0".
- Once the reinstallation is complete, check that the release notes appear on the touchscreen, indicating a successful reinstallation.
- Disable Service Mode. See SERVICE MODE .