LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension -- Model 3 >> Adjustment >> Four Wheel Alignment Check and Adjust >> Complete the Alignment

Complete the Alignment

  1. Print the vehicle summary and verify that the alignment parameters are within specifications.
    NOTE: Repeat the adjustment for any parameter that is not within specification.
  2. Install the rear aero shield panel. See REAR UNDERTRAY AND DIFFUSER - MODEL 3/Y, REAR AERO SHIELD - REMOVE AND REPLACE .
  3. Lower the alignment rack to a working height and lock.
  4. Remove the alignment heads from the wheels.
  5. Remove the brake pedal depressor.
  6. Install the alignment slip/turn plate pins.
  7. Lower the alignment rack to the ground.
  8. Unlatch the driver's door, shift into Park, and remove the steering wheel bubble level.
  9. Unbuckle the seat belts and remove the ballast bags from the vehicle.
  10. Remove the seat covers from the seats.
  11. Enable Service Mode through the touchscreen. See SERVICE MODE .
  12. Unlock the vehicle gateway. See GATEWAY UNLOCK .
  13. On the vehicle touchscreen, touch Service Mode  (spanner icon).
  14. Touch Chassis  (damper icon) and then touch Alignment & Tires  .
  15. Touch Clear Offset  , and then touch Run  .
  16. Touch Controls  (vehicle icon), Service Mode  and then touch Exit Service Mode  .
  17. Remove the wheel chocks.
  18. Install the cowl screen panel, if removed. See UNDERHOOD TRIM - ASSEMBLY, COWL SCREEN, LHD - REMOVE AND REPLACE .
  19. Remove the vehicle from the alignment rack.
  20. Perform a test drive and verify vehicle operation.
scientia non olet · About LEMON Manuals