Steering Column And Wheel - Steering Wheel Switch - LH - Remove And Replace: Install
- Install the LH steering wheel switch to the steering wheel, and then connect the LH steering wheel switch connector.
- Install the screw that attaches the LH steering wheel switch to the steering wheel.
1 N.m (.7 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Cordless Ratchet/Impact Driver
- Torx T8 bit
- Install the LH switch fixing bracket to the steering wheel.
- Install the screws (x3) that attach the LH steering wheel switch to the steering wheel.
1.2 N.m (.9 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- Cordless 1/4 in Dr Ratchet
- Torx T10 socket
- 2 in extension
- Install the LH steering wheel heater connector to the LH switch harness bracket.
- Secure the harness to the LH steering wheel switch harness bracket.
- Install the steering wheel lower spoker cover. See STEERING COLUMN AND WHEEL - STEERING WHEEL, LOWER SPOKE COVER - REMOVE AND REPLACE .
- Install the steering wheel. See STEERING COLUMN AND WHEEL - STEERING WHEEL - PUR LEATHER - REMOVE AND REPLACE .
- Install the driver airbag. See FRONT AIR BAGS - DRIVER AIRBAG ASSEMBLY - REMOVE AND REPLACE .
- Connect the LV power. See LV Battery - Li-Ion - Disconnect And Connect .
- Enter Service Mode. See SERVICE MODE .
- Reinstall software. See SOFTWARE REINSTALL - TOUCHSCREEN .
- Exit Service Mode. See SERVICE MODE .
- Install the rear underhood apron. See UNDERHOOD TRIM - REAR APRON ASSEMBLY - REMOVE AND REPLACE .