Rear Drive Unit Assembly - Assembly, Cable, RDU Ground Strap - Remove And Replace: Notes

Last modified: 23/05/2024 06:53:35

Fig 1: Rear Drive Unit Ground Strap Component Location

Courtesy of TESLA, INC.

NOTE: See PERSONAL PROTECTION to make sure wearing proper PPE when performing the below procedure.

Revision History:

2023-12-11: Updated last step with cross reference to Alignment Requirement Tables.
1129348-00-A XP-10 Power Supply, XP-10
1099645-00-B Fixture, Subframe, Model 3
1140311-00-A Lever Lock, HV Connector, Model 3

WARNING: Only technicians who have been trained in High Voltage Awareness and have completed all required certification courses (if applicable) are permitted to perform this procedure. Proper personal protective equipment (PPE) and insulating HV gloves with a minimum rating of class 0 (1000V) must be worn at all times a high voltage cable, busbar, or fitting is handled. Refer to Tech Note TN-15-92-003 , "High Voltage Awareness Care Points" for additional safety information.