Electrical - Electronic Control Modules - Body Controllers - VC USB Assembly - Remove And Replace: Remove
- Remove the center console phone dock. See INTERIOR TRIM - CENTER CONSOLE - CENTER CONSOLE - PHONE DOCK - CLIP - REMOVE AND REPLACE .
- Remove center console rear end panel. See CENTER CONSOLE - CONSOLE REAR END PANEL, ASSEMBLY - REMOVE AND REPLACE
- Remove LH rear side panel from center console assembly. See CENTER CONSOLE - REAR SIDE PANEL, LH, ASSEMBLY - REMOVE AND REPLACE .
- Remove LH front side panel from center console assembly. See CENTER CONSOLE - CONSOLE SIDE PANEL, CARPET, LH, LHD - REMOVE AND REPLACE .
- Remove LH center decor trim. See CENTER CONSOLE - HOCKEY STICK, LH, ASSEMBLY - REMOVE AND REPLACE .
- Repeat step 3 through step 5 for the RH side of the vehicle.
- Remove the rear underhood apron. See UNDERHOOD TRIM - REAR APRON ASSEMBLY - REMOVE AND REPLACE .
- Disconnect LV battery power. See LV BATTERY - LI-LON - DISCONNECT AND CONNECT
- Remove the rear end module assembly. See CENTER CONSOLE - REAR END MODULE, ASSEMBLY - REMOVE AND REPLACENOTE: No need to remove the rear end module from the assembly.
- Disconnect the center console USB hub connector.
- Remove the bolts (x4) and datum that attach the USB hub to the center console, and then remove the USB hub from the vehicle.
Tip: Use of the following tool(s) is recommended:
- 2 in extension
- Cordless Ratchet/Impact Driver
- Torx T20 socket
- Ratchet/torque wrench