LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electrical System (2 Of 2) -- Model 3 >> Electronic Control Modules >> Body Controllers - Assembly, Right Controller - Remove And Replace >> Remove

Body Controllers - Assembly, Right Controller - Remove And Replace: Remove

  1. Open all doors and lower all windows.
  2. Remove the rear underhood apron. See UNDERHOOD TRIM - REAR APRON ASSEMBLY - REMOVE AND REPLACE .
  3. Remove the driver footwell cover. See DASH PANEL - DRIVER FOOTWELL COVER ASSEMBLY - REMOVE AND REPLACE .
  4. Remove the RH instrument panel end cap. See DASH PANEL - END CAP, LH - REMOVE AND REPLACE .
  5. Remove the glove box. See DASH PANEL - GLOVE BOX WITH USB ASSEMBLY - REMOVE AND REPLACE .
  6. Remove the LH lower A-pillar trim. See A - B - C POST INTERIOR TRIM - A - PILLAR LOWER ASSEMBLY, LH - REMOVE AND REPLACE .
  7. Release the lock, and then disconnect the RH front door electrical connector from the RH body controller module.
    G16596177Courtesy of TESLA, INC.
  8. Release the connector lock, and then disconnect the front passenger seat electrical connector from the RH body controller module.
    G16596178Courtesy of TESLA, INC.
  9. Disconnect the J10 instrument panel electrical connector from the RH body controller module.
    G16596179Courtesy of TESLA, INC.
  10. Disconnect the J11 HVAC electrical connector from the RH body controller module.
    G16596180Courtesy of TESLA, INC.
  11. Release the electrical harness clips (x2) from underneath the IP carrier.
    G16596181Courtesy of TESLA, INC.
    G16596182Courtesy of TESLA, INC.
  12. Fold back the RH front carpet.
  13. Release harness clip from car computer.
    G16596183Courtesy of TESLA, INC.
  14. Disconnect connector from the right body harness.
    G16596184Courtesy of TESLA, INC.
  15. Disconnect connectors from car computer.
    G16596185Courtesy of TESLA, INC.
  16. Release the harness clip from the RH body controller.
    G16596186Courtesy of TESLA, INC.
  17. Release the connector lock, and then disconnect the J1 power electrical connector from the RH body controller module.
    G16596187Courtesy of TESLA, INC.
  18. Disconnect the J12 body electrical connector from the RH body controller module.
    G16596188Courtesy of TESLA, INC.
  19. Release the connector lock, and then disconnect the J4 body electrical connector from the RH body controller module.
    G16596189Courtesy of TESLA, INC.
  20. Release the connector lock, and then disconnect the J2 body electrical connector from the RH body controller module.
    G16596190Courtesy of TESLA, INC.
  21. Disconnect the J5 body electrical connector from the RH body controller module.
    G16596191Courtesy of TESLA, INC.
  22. Disconnect the J6 underhood storage unit electrical connector from the RH body controller module.
    G16596192Courtesy of TESLA, INC.
  23. Release the clip that attaches the RH front carpet to the body at the RH A-pillar.
    G16596193Courtesy of TESLA, INC.
  24. Release the RH body harness from the RH body controller and A-pillar and move aside.
    G16596194Courtesy of TESLA, INC.
    G16596195Courtesy of TESLA, INC.
  25. Remove and discard the nut that attaches the RH body controller module to the body.
    WARNING: The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
    multimedia:A supplement to the article is available.
    G16596197Courtesy of TESLA, INC.
  26. Maneuver the RH body controller module from under the IP, and then remove it from the vehicle.
    G16596198Courtesy of TESLA, INC.
    G16596199Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals