LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2024 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Electrical System (2 Of 2) -- Model 3 >> Electronic Control Modules >> Body Controllers - Assembly, Right Controller - Remove And Replace >> Install

Body Controllers - Assembly, Right Controller - Remove And Replace: Install

  1. Maneuver the RH body controller module into position under the IP carrier, and align the W clip with body cut out.
    G16596200Courtesy of TESLA, INC.
    G16596201Courtesy of TESLA, INC.
  2. Install the nut that attaches the RH body controller module to the body.

    4.75 N.m (3.5 lbs-ft) 

    G16596202Courtesy of TESLA, INC.
  3. Secure the clips (x3) that attach the RH body harness to the RH body controller and A-pillar.
    G16596203Courtesy of TESLA, INC.
    G16596204Courtesy of TESLA, INC.
  4. Connect the clip that attaches the RH front carpet to the body at the RH A-pillar.
    G16596205Courtesy of TESLA, INC.
  5. Connect the J6 underhood storage unit electrical connector to the RH body controller module.
    G16596206Courtesy of TESLA, INC.
  6. Connect the J5 body electrical connector to the RH body controller module.
    G16596207Courtesy of TESLA, INC.
  7. Secure the connector lock, and then connect the J2 body electrical connector to the RH body controller module.
    G16596208Courtesy of TESLA, INC.
  8. Secure the connector lock, and then connect the J4 body electrical connector to the RH body controller module.
    G16596209Courtesy of TESLA, INC.
  9. Connect the J12 body electrical connector to the RH body controller module.
    G16596210Courtesy of TESLA, INC.
  10. Secure the connector lock, and then connect the J1 power electrical connector to the RH body controller module.
    G16596211Courtesy of TESLA, INC.
  11. Secure harness clip to RH body controller.
    G16596212Courtesy of TESLA, INC.
  12. Connect connector to the right body harness.
    G16596213Courtesy of TESLA, INC.
  13. Secure harness clip to car computer.
    G16596214Courtesy of TESLA, INC.
  14. Disconnect connectors from car computer.
    G16596215Courtesy of TESLA, INC.
  15. Unfold back the RH front carpet.
  16. Secure the electrical harness clips (x2) to underneath the IP carrier.
    G16596216Courtesy of TESLA, INC.
    G16596217Courtesy of TESLA, INC.
  17. Connect the J11 HVAC electrical connector to the RH body controller module.
    G16596218Courtesy of TESLA, INC.
  18. Connect the J10 instrument panel electrical connector to the RH body controller module.
    G16596219Courtesy of TESLA, INC.
  19. Secure the connector lock, and then connect the front passenger seat electrical connector to the RH body controller module.
    G16596220Courtesy of TESLA, INC.
  20. Secure the connector lock, and then connect the front passenger seat electrical connector to the RH body controller module.
    G16596221Courtesy of TESLA, INC.
  21. Secure the lock, and then connect the RH front door electrical connector to the RH body controller module.
    G16596222Courtesy of TESLA, INC.
  22. Install the LH lower A-pillar trim. See A - B - C POST INTERIOR TRIM - A - PILLAR LOWER ASSEMBLY, LH - REMOVE AND REPLACE .
  23. Install the glove box. See DASH PANEL - GLOVE BOX WITH USB ASSEMBLY - REMOVE AND REPLACE .
  24. Install the RH instrument panel end cap. See DASH PANEL - END CAP, LH - REMOVE AND REPLACE .
  25. Install the driver footwell cover. See DASH PANEL - DRIVER FOOTWELL COVER ASSEMBLY - REMOVE AND REPLACE .
  26. Install the rear underhood apron. See UNDERHOOD TRIM - REAR APRON ASSEMBLY - REMOVE AND REPLACE .
  27. Move RH front seat to original position, and close RH front door.
  28. Reinstall the vehicle firmware. See SOFTWARE REINSTALL - TOUCHSCREEN .
  29. Locally connect a laptop with Toolbox 3 to the vehicle. See TOOLBOX 3 - CONNECT AND DISCONNECT .
  30. In Toolbox, click the Actions  tab, type "PROC_VCRIGHT_X-POST-REPLACEMENT-PROCEDURE" into the search field, click(i) , click Run  , and allow the routine to complete.
  31. Click the Actions  tab, type "PROC_DI_X_PAIR-IMMOBILIZER-AND-VEHICLE-ODOMETER" into the search field, click(i) , click Run  , and allow the routine to complete.
  32. Disconnect the laptop from the vehicle.
  33. Disable Service Mode. See SERVICE MODE .
  34. Raise all windows and close the LH front door.
scientia non olet · About LEMON Manuals