Module - HomeLink Transmitter - Remove And Replace: Remove
- Open the LH front door and fully lower the LH front window.
- Remove the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
- Disconnect 12 V power. See 12 V/LV POWER (DISCONNECT AND CONNECT) .
- Remove the underhood storage unit. See Underhood Storage Unit (Remove and Replace) .
- Release the connector lock, and then disconnect the electrical connector from the homelink module.CAUTION: DO NOT push down on the red locking tab. Pull the tab away from the connector until the connector is unlocked, and then continue pulling to release the connector.
- Pry the homelink module rearward and slide it outboard to release the tab from the bracket, and then remove the module from the vehicle.