LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2022 >> Model Y Performance >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Electrical System -- Model Y (2 Of 2) >> Keyless Entry And Security >> Module - Body Controller - Security (2nd Generation) - Remove And Replace >> Remove

Module - Body Controller - Security (2nd Generation) - Remove And Replace: Remove

  1. Open the front doors and lower the front windows.
  2. Move the front seats to their lowest and rearmost positions.
  3. Remove the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
  4. Disconnect 12 V power. See 12 V/LV POWER (DISCONNECT AND CONNECT) .
  5. Remove the center console brightwork (2.0). See Brightwork - Center Console (2.0) - Remove and Replace
  6. Release the clips (x6) that attach the cup holder decor to the center console assembly, and then disconnect the security controller electrical connector.
    G00624442Courtesy of TESLA, INC.
    G00624443Courtesy of TESLA, INC.
  7. Remove the screws (x2) that attach the security controller to the cup holder decor, and then remove the security controller from the decor.

    Tip: Use of the following tool(s) is recommended:

    • Wiha in bit holder adapter
    • Torx T20 socket
    • Wiha TorqueVario-S 0.8 N.m - 2.0 N.m screwdriver (installation only)
    G00624444Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals