SIM Card - Car Computer (Info-Ryzen) - Retrofit: Procedure
- Disconnect 12V/LV power. See 12V/LV Power (Disconnect and Connect) .
- Remove the passenger footwell cover. See Cover - Footwell - Passenger (LHD) (Remove and Replace) .
- Install the new SIM card into the car computer slot with the notch up and the gold pads facing away from the bulkhead.NOTE:
Use a flashlight and inspection mirror to aid installation.
CAUTION:Make sure that the SIM card goes into the slot, before releasing your grip of the SIM card.
- Carefully press the SIM card fully into the slot, so that the catch engages.CAUTION:
If using a thin tool to press the SIM card in, use the tool as shown.
- Install the passenger footwell cover. See Cover - Footwell - Passenger (LHD) (Remove and Replace) .
- Connect 12V power. See 12V/LV Power (Disconnect and Connect)
- Enable the external SIM card using Toolbox 3:
- Connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 - Connect and Disconnect .
- Select the Actions tab and search for "Toggle SIM Card".
- Select the ODIN routine PROC_ICE_X_ENABLE-DISABLE-SIM-CARD, and then click the link of the routine.
- Uncheck Enable_Onboard_Sim to disable the on-board SIM card.
- Click RUN , and allow the routine to complete.
- Disconnect the laptop from the vehicle. See Toolbox 3 - Connect and Disconnect .
- Perform a functional check of the LTE service.