LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model Y Performance >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim (Model Y) >> Center Console >> Module - Inductive Charger - Center Console (2.0) - Remove And Replace >> Remove

Module - Inductive Charger - Center Console (2.0) - Remove And Replace: Remove

  1. Open the front doors and lower the front windows.
  2. Move the front seats to the most rearward and lowest position.
  3. Remove the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
  4. Disconnect 12V/LV power. See 12V/LV Power (Disconnect and Connect) .
  5. Pivot the center console armrest up for access.
    G00645085Courtesy of TESLA, INC.
  6. Release the clips (x17) that attach the center console decor trim to the center console, disconnect the connector, and then remove the decor trim from the center console.
    NOTE: Release the surrounding clips first, and then release the front upper portion of trim.
    G14824492Courtesy of TESLA, INC.
    G14824489Courtesy of TESLA, INC.
    G14824490Courtesy of TESLA, INC.
    G14824491Courtesy of TESLA, INC.
  7. Remove the screws (x3) that attach the center console inductive charger module to the decor trim.

    1.3 N.m (1.0 lbs-ft) 

    Tip: Use of the following tool(s) is recommended:

    • Torx T20 socket
    G14824485Courtesy of TESLA, INC.
  8. Release the securing tabs (x2) and locating tabs (x2) to remove the inductive charger module from the center console decor trim.
    G14824486Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals