LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model Y Performance >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim (Model Y) >> Center Console >> Module - Inductive Charger - Center Console (2.0) - Remove And Replace >> Install

Module - Inductive Charger - Center Console (2.0) - Remove And Replace: Install

  1. Position the center console inductive charger module to the center console decor trim, and then secure the securing tabs (x2) and locating tabs (x2).
    G14824487Courtesy of TESLA, INC.
  2. Install the screws (x3) that attach the center console inductive charger module to the decor trim.

    1.3 N.m (1.0 lbs-ft) 

    G14824488Courtesy of TESLA, INC.
  3. Position the center console decor trim assembly onto the center console, connect the connector, and then secure the clips (x17) that attach the decor trim to the center console.
    G14824489Courtesy of TESLA, INC.
    G14824490Courtesy of TESLA, INC.
    G14824491Courtesy of TESLA, INC.
    G14824492Courtesy of TESLA, INC.
  4. Close the center console armrest.
  5. Connect 12V/LV power. See 12V/LV Power (Disconnect and Connect) .
  6. Install the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
  7. Close hood
  8. Move the front seat to the original positions.
  9. Raise the front windows and close the front doors.
scientia non olet · About LEMON Manuals