Mount - Front Drive Unit - LH - Remove And Replace: Install

Install the bolts (x3) that attach the front drive unit LH mount to the front drive unit.
35 N.m (25.8 lbs-ft) + 55 degrees

Tip: Use of the following tool(s) is recommended:
- Ratchet/torque wrench
- External Torx E14
Courtesy of TESLA, INC.
Install the clips (x2) that attach the front drive unit harness to the front drive unit inverter.

Courtesy of TESLA, INC.
Install the front subframe assembly. See Subframe Assembly - Front (Dual Motor) - Remove And Install .
Refer to the Alignment Requirement tables to determine whether an EPAS alignment check (EC) or four wheel alignment check (AC) is necessary. If performed, add the alignment check/adjust as a separate activity. See Alignment Requirement - Suspension .