USB Hub - Center Console - Front - Remove And Replace: Remove
- Open the RH front door and lower the RH front window.
- Move the front passenger seat rearward.
- Fully retract the center console lid, cupholder, and sliding tray into the locked position.
- Release the clips (x4) that attach the center console service panel to the center console assembly, and then pull the panel upward to access the electrical harness.NOTE: Use a 90 degree plastic trim tool.
- Disconnect the electrical connectors (x3), and then release the clip that attaches the electrical connector to the center console service panel.
- Remove the screws (x3) that attach the front center console USB hub to the center console service panel assembly, and then remove the USB hub from the assembly.NOTE: Use of the following tool(s) is recommended:
- Torx T20 socket