LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model S Plaid >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Body -- Model S) >> Body Panels >> Hood Assembly - Remove And Install >> Installation

Hood Assembly - Remove And Install: Installation

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.

Installation procedure is the reverse of removal, except for the following:

NOTE: Clean the affected areas before installation.
  1. Align the hood hinges to their previously marked locations.
  2. Check the alignment of the hood to the body and adjust as necessary.
scientia non olet · About LEMON Manuals