LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Electrical System -- Model S) >> Radar Sensor >> Sensor - Radar - Front - Remove And Replace >> 2nd Generation >> Removal

2nd Generation: Removal

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fascia Fascia Assembly - Front (Remove And Install) .
  2. Release the clip that secures the radar sensor electrical harness to the radar bracket.
  3. Disconnect the electrical connector from the radar sensor.
  4. Release the fasteners that secure the radar bracket to the front bumper (torque 6 N.m), and then remove the radar bracket and radar sensor from the vehicle as an assembly.
  5. Use a trim tool to release the tabs that secure the radar sensor to the radar bracket, and then remove the radar sensor from the bracket.
scientia non olet · About LEMON Manuals