Image Capture

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not sit in or lean on the vehicle during image capture.

In Toolbox 3, go to Dashboards > Service Tools > View DAS Images > Image Capture .
Exit the vehicle with the laptop.
Click Capture Image in the lower right corner of the DAS Image Viewer screen.

In the "Main" and "Narrow" camera views, determine if the top edge of the tape is between the positive 1 and negative 3 green degree lines.

NOTE: The "positive" degree lines are below the main horizontal axis. The "negative" degree lines are above the main horizontal axis.

Courtesy of TESLA, INC.

1	Positive 1 green degree line
2	Tape
3	Negative 3 green degree line

If the top edge of the tape is not between the green degree lines, retrofit a triple camera rear view mirror mount plate with integrated pitch adjustment, refer to TRIPLE CAMERA PITCH ADJUSTMENT - FORWARD FACING - 2ND GENERATION AUTOPILOT (RETROFIT) .
If the top edge of the tape is between the green degree lines, no further pitch adjustment is necessary.