LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Electrical System -- Model Y (2 Of 2)) >> Electronic Control Modules >> Steering Controller - Remove And Replace >> Remove

Steering Controller - Remove And Replace: Remove

WARNING: This page is about a different car, the 2024 Tesla Model Y, 2023 Tesla Model Y, 2022 Tesla Model Y, 2021 Tesla Model Y, and 2020 Tesla Model Y. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
  2. Disconnect 12 V power. See 12 V/LV POWER (DISCONNECT AND CONNECT) .
  3. Remove the driver airbag. See Airbag - Driver (Remove and Replace) .
  4. Disconnect the steering wheel electrical wiring harness from the connector.
    G14833773Courtesy of TESLA, INC.
  5. Release the clips that attach the horn assembly, and then move the horn assembly to the side.
    G14833774Courtesy of TESLA, INC.
  6. Remove the screws (x4) that attach the bright surround to the steering wheel, and then remove the surround.

    Tip: Use of the following tool(s) is recommended:

    • T20 socket
    G14833775Courtesy of TESLA, INC.
  7. Disconnect the electrical harness from the steering wheel controls ECU connector.
    G14833776Courtesy of TESLA, INC.
  8. Remove the screws (x2) that attach the steering wheel controls ECU to the bright surround, and then remove the ECU from the surround.

    Tip: Use of the following tool(s) is recommended:

    • T10 Torx bit
    G14833777Courtesy of TESLA, INC.
    G14833778Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals