LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model S Performance >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Electrical System -- Model Y (2 Of 2)) >> Electronic Control Modules >> Module - Body Controller - Front - Remove And Replace >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2024 Tesla Model Y, 2023 Tesla Model Y, 2022 Tesla Model Y, 2021 Tesla Model Y, and 2020 Tesla Model Y. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS: MODULE - BODY CONTROLLER - FRONT (REMOVE AND REPLACE)

Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the HVAC plenum outer duct to the vehicle 4 N.m (2.9 ft-lbs) 
  • 10 mm socket
  • 1/4 in std flex head ratchet
  • 1/4 in flex head torque wrench (installation only)
Reuse  
Bolts (x2) that attach the front body controller module shield assembly to the vehicle 8.5 N.m (6.3 ft-lbs) 
  • 10 mm socket
  • 1/4 in std flex head ratchet
  • 1/4 in flex head torque wrench (installation only)
  • 4 in extension
Reuse  
Bolts (x2) that attach the harness guide to the front body controller module 6 N.m (4.4 ft-lbs) 
  • 8 mm 12 pt Combination Wrench
  • 8 mm socket
  • 1/4 in std ratchet
  • 1/4 in torque wrench (installation only)
  • 2 in extension
Replace  
Bolts (x3) that attach the front body controller module to the vehicle 10 N.m (7.4 ft-lbs) 
  • 10 mm socket
  • 1/4 in std ratchet
  • 1/4 in torque wrench (installation only)
  • 10 in extension
Reuse  
Bolt that attaches the front body controller module ground strap to the body 10 N.m (7.4 ft-lbs) 
  • 10 mm socket
  • 1/4 in std flex head ratchet
  • 1/4 in torque wrench (installation only)
Replace  
Bolt that attaches the ground strap to the front body controller module 9 N.m (6.6 ft-lbs) 
  • 10 mm deep socket
  • 1/4 in std flex head ratchet
  • 1/4 in torque wrench (installation only)
Reuse