Mechanism - Pivot - Touchscreen - Remove And Replace: Install
- Position the touchscreen pivot mechanism on the display housing.NOTE: Tilt and lower the mechanism onto the display housing. Ensure the plastic washers are present.
- Install the new bolts (x2) that attach the touchscreen pivot mechanism to the display housing.
10 Nm (7.4 lbs-ft)
Tip: Use of the following tool(s) is recommended:
- 2 in extension
- 10 mm socket
- Flex head ratchet/flex head torque wrench
- Ratchet/torque wrench
- Install the touchscreen.