Steering Rack - Remove And Replace: Install
- Install the bolts (x3) that attach the steering rack to the front subframe assembly.
167 N.m (123.2 ft-lbs)
NOTE: Use of the following tool(s) is recommended:- 21 mm socket
- Install the front subframe assembly. See Subframe Assembly - Front (Remove and Install) .
- Perform the firmware redeploy procedure. See Firmware Reinstall - Toolbox .
- Refer to the Alignment Requirement tables to determine if an alignment check (AC) or full adjustment (FA) is necessary. See Alignment Requirement - Suspension .