LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2021 >> Model S Long Range Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Electrical System -- Model S) >> Keyless Entry And Security >> Casing - Key Fob - Remove And Replace >> Removal

Casing - Key Fob - Remove And Replace: Removal

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmitter battery.
  2. Release the side panel:
    • If using a flat screwdriver: Hold the transmitter in one hand. Place the blade of a flat screwdriver or similar object on the edge of the side panel, and then press away from the transmitter to release the side panel. Repeat this step on the other side.
    G15035177Courtesy of TESLA, INC.
    • If using the special tool: Put the rounded side of the tool inside the battery compartment. Turn the tool to the left and to the right to remove the side panel.
    G15035178Courtesy of TESLA, INC.
  3. Release the 4 clips, then remove the bottom panel.
    G15035179Courtesy of TESLA, INC.
  4. Remove and retain the circuit board.
    CAUTION: Take care not to damage component(s).
  5. Discard the other components.
scientia non olet · About LEMON Manuals