Harness - Media Control Unit - Retrofit: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Tesla Model S, 2019 Tesla Model S, 2018 Tesla Model S, 2017 Tesla Model S, and 2016 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
Last modified: 18/11/2022 10:16:09
Special tools required for this procedure:
| Supplier | Part Number | Description |
|---|---|---|
| Tesla | 1025812-00-A | Pin Drag Kit |
NOTE:
This procedure might contain steps to use Toolbox 2 to supplement the service operation. Toolbox 2 and its Panels are being phased out and replaced with Toolbox 3 routines.
This document describes J Harness retrofit procedures for replacement MCUs on Model S cars build from start of production (SOP) to December 2015.
NOTE:
Refer to the Model S Circuit and Connector Reference for additional information.