USB Hub - Center Console - Front - Remove And Replace: Remove
- Open the RH front door and lower the RH front window.
- Move the front passenger seat rearward.
- Fully retract the center console lid, cupholder and sliding tray into the locked position.
- Use a 90 degree plastic trim tool to release the clips (x4) that attach the center console service panel to the center console, and then pull the panel upward to access the harness.
- Disconnect the center console service panel electrical connectors (x3), and then remove the assembly from the center console.
- Remove the screws (x3) that attach the front USB hub to the service panel assembly.
1.5 N.m (1.1 ft-lbs)
Tip: Use of the following tool(s) is recommended:
- T20 socket