Inverter - Front Drive Unit - Remove And Replace: Notes
Last modified: 23/11/2022 11:14:57
NOTE:
See Personal Protection
to make sure proper PPE is worn when performing the below procedure.
Revision History:
- 2023-08-01: Added steps to remove and install NVH cover.
- 2023-07-25: Updated resolver error learn step.
- 2023-06-13: Replaced Toolbox 3 routines with Touchscreen UI steps.
WARNING:
The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.
NOTE:
Video For Removal, Part 1
multimedia:A supplement to the article is available.
NOTE:
Video For Removal, Part 2
multimedia:A supplement to the article is available.
NOTE:
Video For Installation
multimedia:A supplement to the article is available.
WARNING:
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.