Drive Cycle Calibration - Forward Facing Camera: Procedure
- Connect a laptop to the diagnostic port of the vehicle, and then use Toolbox 3 to locally connect to the vehicle. See Toolbox 3 (Connect And Disconnect) .
- Unlock the vehicle gateway for diagnostic communication. See Gateway Unlock .
- Using Toolbox 3:
- Select the Actions tab and search for "DAS Service Point Calibration".
- Select the ODIN routine PROC_DAS_X_SERVICE-POINT-CALIBRATION , and then click the link of the routine.
- Click RUN
and follow the onscreen instructions to calibrate the forward facing camera.WARNING: Perform the calibration procedure in a suitable location and comply with all local traffic safety laws.NOTE: Have an assistant monitor Toolbox during the drive cycle.