Module - Steering Column Control - Remove And Replace: Removal
- Remove the steering wheel STEERING WHEEL (REMOVE AND REPLACE) .NOTE: Ensure that the wheels are in the straight ahead position before removing the steering wheel.
- Remove the driver's side lower dash trim Trim - Dash - Driver's Side - Lower (Remove And Replace) .
- Release the clips (x2) that secure the steering column cover to the instrument cluster bezel.
- Carefully rock the controller module 2-3 degrees back and forth to break the bond between the module and the steering column.
- Release the steering controller module from the shaft.
- Remove and discard the airbag harness retaining clip from the steering column module harness connector.
- Disconnect the steering column module harness connector.
- Remove the steering control module from the vehicle.