LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2019 >> Model X Standard Range >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Safety And Restraint Systems -- Model X >> Pedestrian Protection System >> Actuator - Pedestrian Protection - LH - Remove And Replace >> Removal

Actuator - Pedestrian Protection - LH - Remove And Replace: Removal

  1. Remove the rear center underhood apron. See UNDERHOOD APRON - CENTER - REAR (REMOVE AND REPLACE) .
  2. Remove the LH and RH underhood aprons. See UNDERHOOD APRON - LH (REMOVE AND REPLACE) .
  3. Remove the underhood storage unit. See UNDERHOOD STORAGE UNIT (REMOVE AND REPLACE) .
  4. Remove the HEPA filter. See FILTER - HEPA (REMOVE AND REPLACE) .
  5. Disconnect 12V power. See DISCONNECT 12V POWER .
  6. Remove the LH and RH wiper arms. See WIPER ARM - LH (REMOVE AND REPLACE) .
  7. Remove the cowl screen panel. See PANEL - COWL SCREEN (REMOVE AND REPLACE) .
  8. Disconnect the LH pedestrian protection actuator electrical connector.
    NOTE: Pull the locking tab outward to release the electrical connector.
    G15206111Courtesy of TESLA, INC.
  9. Release the fir tree clip that attaches the LH pedestrian protection actuator connector to the body.
    G15206112Courtesy of TESLA, INC.
  10. Remove the bolts (x2) that attach the LH pedestrian protection actuator to the body.
    NOTE: 10 mm
    G15206113Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals