LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2019 >> Model X Standard Range >> Repair and Diagnosis (Single Page) >> Restraints >> Restraints Control Systems >> Safety And Restraint Systems -- Model X >> Sensors >> Sensor - Occupant Classification - Front Passenger's Seat - Calibration >> Notes

Sensor - Occupant Classification - Front Passenger's Seat - Calibration: Notes

Last modified: 18/11/2022 10:19:45

NOTE: Any service performed on a seat assembly with an occupancy sensor must be followed by a calibration procedure.
NOTE: In the event of an airbag or seat belt tensioner deployment, certain airbag and seat belt components must be replaced, and other components must be inspected for damage. Refer to SRS INSPECTION AND COMPONENT REPLACEMENT for a specific list of items that must be inspected and replaced.
NOTE: This procedure might contain steps to use Toolbox 2 to supplement the service operation. Toolbox 2 and its Panels are being phased out and replaced with Toolbox 3 routines.
scientia non olet · About LEMON Manuals