Steering Column - Remove And Replace: Removal
- Remove the steering column control module MODULE - STEERING COLUMN CONTROL (REMOVE AND REPLACE) .
- Remove the screws (x2) that secure the driver's knee bolster (torque 2.3 N.m). Remove the bolster from the vehicle.
- Remove the LH center console closeout extension Closeout Extension - Center Console - LH (Remove And Replace) .
- Remove the LH footwell assembly cover Assembly - Cover - Footwell - Driver's (Remove And Replace) .
- Remove the driver's knee air bag Knee Air Bag - Driver's (Remove And Replace) .
- Mark the upper intermediate shaft position relative to the column.
- Remove the bolt that secures the upper intermediate shaft to the steering column (torque 30 N.m).
- Remove the fasteners that secure the steering column to the mounting bracket (upper nuts 30 N.m, lower bolts 17 N.m).
- Disconnect the steering column motor harness connectors (x2).CAUTION: Take care not to damage component(s).
- Release the steering column from the upper intermediate shaft and remove the steering column from the vehicle.