Steering Rack (LHD) (3rd Generation) - Remove And Replace: Installation

Install the bolts (x3) that attach the steering gear assembly to the front subframe.
167 Nm (123.2 lbs-ft)

Use of the following tool(s) is recommended:
- 21 mm socket
- Flex head ratchet/flex head torque wrench
- Ratchet/torque wrench
Courtesy of TESLA, INC.
Install the front stabar bar on the subframe assembly.

Courtesy of TESLA, INC.
Remove the front subframe assembly. See SUBFRAME ASSEMBLY - FRONT - 2ND GENERATION (REMOVE AND INSTALL) .