Steering Rack (RHD RWD) (1st Generation) - Remove And Replace: Notes

Last modified: 18/11/2022 10:20:40

This procedure is for vehicles built before April 10, 2016.

See also:

Vehicles built between April 10, 2016 and April 24, 2019: See Steering Rack (RHD RWD) (2nd Generation) (Remove And Replace)
Vehicles built after April 24, 2019: See Steering Rack (RHD Dual Motor) (3rd Generation) (Remove And Replace)

WARNING: If the 12V power supply is disconnected, do not attempt to open any doors with door glass in closed position. Failure to follow this instruction could result in door glass shatter.

NOTE: Before disconnecting the 12V power supply, ensure that the driver's door window is fully open. Failure to follow this instruction could result in vehicle lockout.

WARNING: If the vehicle has air suspension, activate "Jack" mode on the touchscreen before raising and supporting the vehicle.

NOTE: This procedure might contain steps to use Toolbox 2 to supplement the service operation. Toolbox 2 and its Panels are being phased out and replaced with Toolbox 3 routines.