- Install front controller shield to the front controller.
NOTE:
2x bolts, 10mm, 8.5 Nm
 Courtesy of TESLA, INC.
|
- Connect thermal sub-harness to front controller.
NOTE:
1x connector, Rotate fully to secure locking tab.
 Courtesy of TESLA, INC.
|
- Install rear battery tie down strap.
NOTE:
Insert assembly into bracket and rotate to 90 degrees.
 Courtesy of TESLA, INC.
|
- Install 12V battery into vehicle.
 Courtesy of TESLA, INC.
|
- Position battery tie down strap onto battery.
NOTE:
Hook upper tie down strap into rear tie down hook strap and position for installation.
 Courtesy of TESLA, INC.
|
- Install bolt securing upper tie down strap to AC compressor bracket.
NOTE:
1x bolt, 10mm, 5Nm
 Courtesy of TESLA, INC.
|
- Install vent tube hose in 12V battery.
 Courtesy of TESLA, INC.
|
- Install positive terminal and terminal cover.
NOTE:
1x nut, 10mm, 6 Nm, 2x clips.
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Connect first responder loop.
NOTE:
1x connector, Engage locking tab, Connect FRL before connecting 12V to avoid damage to car computer.
 Courtesy of TESLA, INC.
|
- Connect 12V negative terminal.
NOTE:
1x nut, 10mm 6 Nm
 Courtesy of TESLA, INC.
|
- Install rear apron.
NOTE:
12x clips
 Courtesy of TESLA, INC.
|
 Courtesy of TESLA, INC.
|
- Close hood.
 Courtesy of TESLA, INC.
|
- Raise LH front window.
 Courtesy of TESLA, INC.
|
- Close LH front door.
 Courtesy of TESLA, INC.
|