Drive Unit - Front (1st Generation) - Remove And Install: Notes
Last modified: 08/06/2022 11:58:44
Special tools required for this procedure:
| Supplier | Part Number | Description |
| Snap-on | 1126496-00-B | Wrench, Torque+Angle, 3/8 Dr |
| Bosch | FMG-750 | Transmission Jack 750 Kg Europe only |
| Tesla | 1053350-00-A | Transmission Jack Cradle Adapter Plate Europe only |
| Tesla | 1063141-00-A | 1/2 Ton Economy Transmission Jack North America, APAC only |
| Tesla | 1048391-00-B | Drive Unit Dual Motor Cradle - Delrin white |
| Tesla | 1056566-00-A | Locating Shim Set, Front Motor |
| Tesla | 1126496-00-B | Wrench, Torque+Angle, 3/8" Dr |
| Tesla | 1139297-00-A | SKT, 3/8" DR, Low Profile, 15 mm |
| Tesla | 1083189-**-A | Tool, ATF oil refiller |
| Tesla | 1498673-00-A | KIT, CABLE AXLE REMOVER, MS/MX/M3 |
This procedure is for vehicles built through April 24, 2019. For vehicles built after April 24, 2019, see DRIVE UNIT - FRONT (2ND GENERATION) (REMOVE AND INSTALL) .