Sensor - Pressure Tube (Pedestrian Protection) - Remove and Replace: Notes

Last modified: 20/10/2022 09:57:22

Courtesy of TESLA, INC.

NOTE: See Personal Protection to make sure to wear proper PPE when performing the below procedure.

WARNING: Make sure 12V power has been disconnected for at least 2 minutes before disconnecting electrical harnesses from SRS components (sensors, modules, airbags, etc.). Failure to do so can result in unintended safety system behaviors. For more information on SRS precautions, see AIRBAG AND SUPPLEMENTARY RESTRAINT SYSTEM (SRS) PRECAUTIONS .