LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2017 >> Model 3 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Electrical System (2 Of 2) -- Model 3 >> Keyless Entry and Security >> Replacement Keys - Program (No Keys Present) >> Procedure

Replacement Keys - Program (No Keys Present): Procedure

  1. Place the two new keys onto the center console behind the cup holders.
  2. Connect a laptop with Toolbox 3 to the vehicle.
  3. In Toolbox, click the Actions/Autodiag  tab, type "NFC Cards Whitelist" in the search field, click on NFC Cards Whitelist Pairing and Permission Adding  , and then click Run  to start the pairing process.
    NOTE: Alternatively, type "NFC-CARD-V2", click on PROC_VCSEC_C_PAIR-NFC-CARD-V2  , and then click Run  to start the pairing process.
  4. In Toolbox, under "pairRequirement", type "2", and then click Submit  .
    NOTE: Allow the routine to run. If the routine fails, try again.
  5. Once the routine completes, confirm that it displays the correct number of paired keys.
    NOTE: If the number of keys successfully paired does not match the number of keys requested, reposition the keys on the center console or phone dock and repeat from step  3.
  6. Tap each new key against the driver's side B-pillar applique to verify that the key locks and unlocks the vehicle.
  7. Place each new key onto the key reader behind the cup holders on top of the center console to verify they are both authenticated and can start the vehicle.
  8. Disconnect the laptop from the vehicle.
scientia non olet · About LEMON Manuals