Drive Unit - Front (2nd Generation) - Remove And Replace: Notes
Last modified: 12/01/2024 00:44:49
Revision History:
- 2024-01-24: Added a note to install a new motor ID label in hood/trunk for China, Japan and Korea.
Special tool required for this procedure:
| Supplier | Part Number | Description |
| Tesla | 1130279-00-A | Lifting Sling, Drive Unit |
This procedure is for vehicles built after April 24, 2019. For vehicles built through April 24, 2019, see DRIVE UNIT - FRONT (1ST GENERATION) (REMOVE AND REPLACE) .
CAUTION:
Do not drain the gearbox fluid from the removed drive unit. Return the drive unit to MRB with the fluid intact for analysis. Transfer the halfshaft caps from the new drive unit to the removed drive unit to prevent spillage.