Actuator - Pedestrian Protection - LH - 2nd Generation - Remove And Replace: Notes
Last modified: 18/11/2022 10:12:38
WARNING:
If the 12V power supply is disconnected, do not attempt to open any doors with door glass in closed position. Failure to follow this instruction could result in door glass shatter.
NOTE:
Before disconnecting the 12V power supply, ensure that the driver's door window is fully open. Failure to follow this instruction could result in vehicle lockout.
NOTE:
This procedure does not currently apply to North American vehicles.
NOTE:
In the event of an airbag or seat belt tensioner deployment, certain airbag and seat belt components must be replaced, and other components must be inspected for damage. Refer to SRS INSPECTION AND COMPONENT REPLACEMENT
for a specific list of items that must be inspected and replaced.
NOTE:
This procedure might contain steps to use Toolbox 2 to supplement the service operation. Toolbox 2 and its Panels are being phased out and replaced with Toolbox 3 routines.