LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2014 >> Model S Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Electrical System (3 Of 3) -- Model S) >> Keyless Entry And Security >> Replacement Keys - Program (No Keys Present) >> Procedure

Replacement Keys - Program (No Keys Present): Procedure

WARNING: This page is about a different car, the 2024 Tesla Model S, 2023 Tesla Model S, 2022 Tesla Model S, and 2021 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the NFC Key card on the wireless charger pad.
    G15092861Courtesy of TESLA, INC.
  2. Release the Instrument Panel Service Panel. See Service Panel - Instrument Panel (Remove and Replace) .
  3. Connect to the vehicle using a laptop equipped with Toolbox 3.
  4. Select the "Actions" tab and search for "Pair NFC'.
  5. Select PROC_VCSEC_C_PAIR-NFC-CARD-V2  , enter the quantity of key fobs to be paired, click Run  , and allow the routine to complete.
  6. Confirm key card functionality on the driver side B-pillar and the wireless charger pad.
  7. Disconnect Toolbox 3 from the vehicle and remove the laptop from the vehicle.
  8. Install the Instrument Panel Service Panel. See Service Panel - Instrument Panel (Remove and Replace) .
  9. Pair the key fob(s). See Additional Key - Program (Existing Key Present) .
scientia non olet · About LEMON Manuals