LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2014 >> Model S Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Electrical System (3 Of 3) -- Model S) >> Electronic Control Modules >> Bracket - Homelink - Remove And Replace >> Remove

Bracket - Homelink - Remove And Replace: Remove

WARNING: This page is about a different car, the 2024 Tesla Model S, 2023 Tesla Model S, 2022 Tesla Model S, and 2021 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fascia assembly. See Fascia Assembly - Front (Remove and Install) .
  2. Remove the homelink module, and then set it aside:
    1. Release the locking tab.
    2. Slide the module to the LH side of the vehicle.
    G15091376Courtesy of TESLA, INC.
    G15091377Courtesy of TESLA, INC.
    G15091378Courtesy of TESLA, INC.
    G15091379Courtesy of TESLA, INC.
  3. Remove the bolt that attaches the homelink bracket to the vehicle, and then remove the bracket from the vehicle.

    5 N.m (3.7 ft-lbs) 

    Tip: Use of the following tool(s) is recommended:

    • 10 mm socket
    G15091380Courtesy of TESLA, INC.
    G15091381Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals