LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2014 >> Model S Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Electrical System (3 Of 3) -- Model S) >> Electronic Control Modules >> Bracket - Homelink - Remove And Replace >> Install

Bracket - Homelink - Remove And Replace: Install

WARNING: This page is about a different car, the 2024 Tesla Model S, 2023 Tesla Model S, 2022 Tesla Model S, and 2021 Tesla Model S. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the homelink bracket into the vehicle, and then install the bolt that attaches the bracket to the vehicle.

    5 N.m (3.7 ft-lbs) 

    Tip: Use of the following tool(s) is recommended:

    • 10 mm socket
    G15091383Courtesy of TESLA, INC.
  2. Install the homelink module.
    1. Release the locking tab.
    2. Slide the module to the RH side of the vehicle.
    G15091384Courtesy of TESLA, INC.
    G15091385Courtesy of TESLA, INC.
    G15091386Courtesy of TESLA, INC.
    G15091376Courtesy of TESLA, INC.
  3. Install the front fascia assembly. See Fascia Assembly - Front (Remove and Install) .
scientia non olet · About LEMON Manuals