LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2014 >> Model S Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Steering -- Model 3) >> Upper Column Steering Wheel Steering Lock >> Steering Wheel - Remove and Install >> Remove

Steering Wheel - Remove and Install: Remove

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the vehicle's front wheels straight and the steering wheel centered.
  2. Remove the 2nd row lower seat cushion. See SEAT CUSHION - LOWER - 2ND ROW (REMOVE AND REPLACE) .
  3. Open the hood.
  4. Remove the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
  5. Disconnect 12V power. See 12V/LV POWER (DISCONNECT AND CONNECT) .
  6. Remove the driver airbag. See AIRBAG - DRIVER (REMOVE AND REPLACE) .
  7. Disconnect the steering wheel electrical wiring harness connector.
    G14749478Courtesy of TESLA, INC.
  8. Remove and discard the bolt that attaches the steering wheel to the steering column.

    80 N.m (59.0 ft-lbs) 

    Tip: Use of the following tool(s) is recommended:

    • 10 mm hex
    • 3/8 in std ratchet
    • 3/8 in flex head torque wrench (installation only)
    • 3 in extension
    G14749479Courtesy of TESLA, INC.
  9. Remove the steering wheel from the steering column.
scientia non olet · About LEMON Manuals