Steering Rack (RWD) - Remove and Replace: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.

Last modified: 03/10/2023 04:13:26

NOTE: See Personal Protection to make sure to wear proper PPE when performing below procedure.

Revision History:

2023-10-03: Deleted steps for radiator coolant hoses disconnection.
2023-07-25: Differentiate torque figures for outer bolts that attach the steering gear to the front subframe between 13 mm (27 Nm) and 15 mm (47 Nm) bolts.
2023-07-06: Updated the procedure based on the latest validation.

CAUTION: Vehicles built before March 25th, 2019 have 1st generation front subframes. Vehicles built on March 25th, 2019 and after have 2nd generation front subframes. 1st generation subframes require special M8 bolts (torque 27 Nm) to install 2nd generation steering racks. Refer to the Electronic Parts Catalog for the latest information. 2nd generation subframes cannot accommodate 1st generation (discontinued) steering racks. A 2nd generation steering rack must be installed.

multimedia:A supplement to the article is available.

WARNING: The video(s) included in this procedure are meant as an overview for supplemental purposes only. Follow all of the steps listed in the procedure to avoid damage to components and/or personal injury.