LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2014 >> Model S Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Infotainment System -- Model 3) >> Car Computer >> SD Card - Car Computer - Remove and Replace >> Install

SD Card - Car Computer - Remove and Replace: Install

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use plastic tweezers to install the new SD card into the computer with the gold pads up and facing away from the bulkhead.
  2. Install the car computer connectivity board. See CONNECTIVITY BOARD - CAR COMPUTER (HW2.5) (REMOVE AND REPLACE) .
  3. Connect 12V power. See 12V/LV POWER (DISCONNECT AND CONNECT) .
  4. Install the rear underhood apron. See UNDERHOOD APRON - REAR (REMOVE AND REPLACE) .
  5. Install the 2nd row lower seat cushion. See SEAT CUSHION - LOWER - 2ND ROW (REMOVE AND REPLACE) .
scientia non olet · About LEMON Manuals