LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2014 >> Model S Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Safety And Restraint Systems -- Model 3) >> Pedestrian Protection System >> Actuator - Pedestrian Protection - LH - Remove and Replace >> Remove

Actuator - Pedestrian Protection - LH - Remove and Replace: Remove

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Tesla Model 3, 2022 Tesla Model 3, 2021 Tesla Model 3, 2020 Tesla Model 3, and 2019 Tesla Model 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the underhood storage unit. See UNDERHOOD STORAGE UNIT (REMOVE AND REPLACE) .
  2. Disconnect the 12V power. See 12V/LV POWER (DISCONNECT AND CONNECT) .
  3. Remove the wheel arch liner. See WHEEL ARCH LINER - FRONT - LH (REMOVE AND REPLACE) .
  4. Disconnect pyrotechnic actuator connector (X1).
    G14748078Courtesy of TESLA, INC.
  5. Remove the nuts (x2) that attach the pyrotechnic actuator to the body, and then remove the actuator from the vehicle.

    6 N.m (4.4 ft-lbs) 

    Tip: Use of the following tool(s) is recommended:

    • Torx T30 socket
    • 1/4 in std ratchet
    G14748079Courtesy of TESLA, INC.
    G14748080Courtesy of TESLA, INC.
scientia non olet · About LEMON Manuals