LEMON Manuals: Even more car manuals for everyone
Home >> Tesla >> 2012 >> Model S >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Body -- Model S >> Body Panels >> Liftgate Assembly - Remove And Install >> Installation

Liftgate Assembly - Remove And Install: Installation

Installation procedure is the reverse of removal, except for the following:

  1. Remove the old sealant from the liftgate hinges and body.
  2. Align the liftgate hinges to the marked locations.
  3. Check the alignment of the liftgate to the body and adjust as necessary.
  4. Once the hinge nuts are tightened, apply sealant around the hinges. Refer to SB-13-10-004, "Liftgate Hinge Sealing".
scientia non olet · About LEMON Manuals