LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Lighting Systems) >> Diagnostic Information and Procedures >> Turn Signal Lamps and/or Indicators Always On or Flashing >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the turn signal multifunction switch.
  2. Test for infinite resistance between the signal terminal and the voltage supply terminal with the switch in the open position.
    • If less than infinite resistance, replace the turn signal multifunction switch.
  3. Test for less than 1.5 ohms between the signal terminal and the voltage supply terminal with the switch in the closed position.
    • If greater than 1.5 ohms, replace the turn signal multifunction switch.
scientia non olet · About LEMON Manuals