LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2013 >> Kizashi Base, Standard Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Diagnostic Information and Procedures >> Generator Test >> Load Check

Load Check

NOTE: Use fully charged battery.
  1. Connect ammeter in the same way as No-Load Check .
  2. Run at engine around 2, 000 rpm and turn on the following electrical accessories.
    • Headlight (High beam)
    • Rear window defogger
    • Blower motor (Maximum speed)
  3. Read ammeter.

    If meter reading is less than 20 A, repair or replace generator.